Product Snapshot: Rotary Hammer and Wheel Loader

The Hilti TE 6-A22 cordless rotary hammer is able to deliver 1.8 ft-lb of impact energy and a no-load rpm of 1,050 rpm.

The Deere 944K hybrid wheel loader is now available with an engine that meets Tier 4 Final emissions standards.

The DEWALT 20V MAX cordless stapler features a built-in cable guide to properly drive staples over cable without damaging it.

The Rhino Concrete Crack Lock is an engineered repair kit for cracks in concrete slabs.

Rotary Hammer: Cordless Tool Brings Power

The Hilti TE 6-A22 cordless rotary hammer is able to deliver 1.8 ft-lb of impact energy and a no-load rpm of 1,050 rpm. The tool runs on Hilti’s 22-V lithium-ion battery platform, and at 8.3 lb is designed to be light enough for overhead work. It has an optimum drilling and hammer drilling depth of 1⁄4 in. to 5⁄8 in. in concrete, and it can also be used for corrective chiseling in masonry and brick. The tool is compatible with the TE DRS-6-A dust removal system, which is fully compliant with OSHA regulations for silica dust exposure. Hilti; www.hilti.com

Wheel Loader: Tier 4 Final Engine

The Deere 944K hybrid wheel loader is now available with an engine that meets Tier 4 Final emissions standards. The 536-hp, 13.5-liter Deere PS5 engine has 9% to 14% lower fuel consumption than the earlier Interim Tier 4 engine, according to the manufacturer. Other improvements include greater control over braking and deceleration and lower overall noise levels. External jump-start terminals are now in a locked engine compartment, with trickle-charge options in cold weather. Deere Construction & Forestry Division; www.deere.com

Cordless Stapler: Built-In Cable Guide

The DEWALT 20V MAX cordless stapler features a built-in cable guide to properly drive staples over cable without damaging it. The lightweight tool is only 12 in. tall and 3 in. wide, making it ideal for reaching into hard-to-access areas. A center-mounted LED illuminates the work surface for use in low-light environments. The tool comes with a belt clip that can be attached to either side of the tool. DEWALT; www.dewalt.com

Concrete Repair: Secure Cracks in Slabs

The Rhino Concrete Crack Lock is an engineered repair kit for cracks in concrete slabs. Installation requires a single saw cut with two drilled holes at the ends, where the carbon-fiber Crack Lock is secured in place. The area around the carbon-fiber rod is then filled in with high-strength epoxy paste. Larger cracks in concrete slabs can be repaired with Crack Locks installed every 8 in., with crisscrossed Crack Locks on every other installation. It requires less concrete removal than other concrete-repair products, saving time. Rhino Carbon Fiber Reinforcement Products; www.rhinocarbonfiber.com

Manufacturers can send information on new products to ENR.products@enr.com.

Post a comment to this article

How can you make AI work for your team? Unlock new levels of collaboration by leveraging AI to accelerate contract negotiations, mitigate risks, and streamline project preparation and execution. In this webinar, hear first-hand how industry pros improved negotiation outcomes, resolved sticking points faster, and aligned their teams for project success.