Aerial Work Platform: Improved Capacity
The V60 aerial work platform boasts a maximum working height of 63 ft and a 500-lb capacity. The jib can be converted to a boom tip winch with a 1,000-lb material-handling capacity. The boom mounts to a non-CDL, 19,500-lb GVWR truck chassis. The outriggers allow for full deployment in spaces only 9 ft wide for easier access on crowded sites. Elliott Equipment; www.elliottequip.com
Impact Wrench: High Torque
The M18 FUEL 1-in. High-Torque Impact Wrench is able to deliver up to 1,500 ft-lb of fastening torque and 1,800 ft-lb of maximum torque. Weighing only 12.9 lb with the battery, the cordless tool runs on Milwaukee’s M18 FUEL platform and also features OneKey integration for wireless tracking and performance customization through the OneKey smartphone app. Milwaukee Tool; www.milwaukeetool.com
Generator Relocation: Hydraulic Jacking System
Enerpac’s Pick, Skid and Drive strand jack system is designed for moving generators and turbines up to 450 tons around power plants during construction and maintenance. The system is designed to work in spaces with limited access; using a combination of strand jacks and skid beams, the equipment can be moved to an electric trolley or self-propelled modular transport for relocation. According to the manufacturer, generators can be removed for maintenance and a replacement installed in only a matter of hours. Enerpac; www.enerpac.com
Tape Measure Tether: Retractable Lanyard
The Gear Keeper retractable tape measure tether can be attached to any tape measure up to 20 oz with a lanyard loop. It comes with either a belt clip or a carabiner for attachment to a D ring. The retractable lanyard allows for 45 in. of extension without having to worry about accidentally dropping the tape measure. A low retraction force allows for the tape measure to be used without pulling against the lanyard, and slow retraction prevents tangles. Hammerhead Industries; www.gearkeeper.com
Manufacturers can send information on new products to ENR.products@enr.com
