This week we look at a longer jib for a Linden Comansa tower crane and a platform system for working around obstructions on two-story structures. Click here to begin the slide show.
Product Snapshot: Enhanced Tower Crane and Rapid-Assembly Platform System
Klein Fiberglass Fish Tape has laser-etched measurements which show the remaining tape in the reel. The durable tape is able to slide over existing wires and cables and around multiple bends. It features a 7-in. leader that gets the tape past crowded conduit. The tape is available in 50-ft, 100-ft and 200-ft increments. Klein Tools; 800-553-4676; www.kleintools.com
Unknown
Designed to provide access to single and two-story structures, the Easi-Dec Platform System can be assembled from the ground up by two workers in approximately 10 minutes. The 6 1/2-ft by 2 1/2-ft platform is rated to 570 lb and is compliant with relevant OSHA and ANSI standards. The platform's telescoping legs are adjustable from 10 ft, 9-in. to 18 ft, 2-in. and are made of corrosion-resistant aluminum. The platform's design allows it to work around obstructions that would prevent the use of traditional scaffolding systems. Kee Safety; 800-851-5181; www.keesafety.com
Unknown
The 21 LC660 Tower Crane is now available with a maximum job length of 84 meters. The crane is available in four versions, with maximum loads of 18, 24, 36 and 48 metric tones respectively. Jib sections can be assembled in 5-meter increments up to 80 meters, allowing for customization of the tower crane to fit the needs of the job site. Linden Comansa America; 800-589-7980; www.lindencomansaamerica.com
Photo courtesy Linden Comansa America
The Orbit Multi-Box Bar Hanger allows for the precise horizontal placement of electrical boxes between wall studs. The hanger accommodates both 4-in. and 4 11/16-in. square steel boxes, which can be hung at any location along the hanger bracket. The multi-box hanger are available for 16-in. and 24-in. stud spacings. Orbit Electric; 213-745-8884; www.orbitelectric.com
Unknown
