New product announcements:   05/05/2010 Wheel Loader: Load-Sensing Hydraulics The Hyundai HL770-9 Wheel Loader now features a load-sensing hydraulic system with a variable volume pump. Other improvements over previous models include a fully automatic power-shift transmission with variable shift control, multistage clutch cut-off and an integrated payload system. A larger cab boasts improved visibility and optional joystick seating. It has a 5.5-cu-yd bucket and an integrated rear-view backup camera. The GPS-enabled HI-Mate system allows fleet operators to track fuel efficiency and diagnostics through a Web-based interface. Hyundai Construction Equipment Americas Inc.; 847-437-3333; www.hyundaiamericas.com Fire-Stop Collar: Meets Multiple Fire-Safety Ratings The SpecSeal

New product announcements:   04/28/2010 Vibrating Concrete Screed: Single Operator Required The E-Screed is a battery-powered, vibrating screed that requires only one operator for strike-off of wet concrete. The screed’s high-frequency vibration produces uniform vibration distribution over the entire blade length, enhancing the integrity of the concrete. The screed is powered by a 36-V lithium-iron-phosphate battery that boasts over 1,500 lifetime cycles. The E-Screed battery-powered unit can be used with existing Magic Screed blades. Allen Engineering Corp.; 870-236-7751; www.alleneng.com Compact Excavator: Redesigned Boom The redesigned Bobcat 324 compact excavator features a boom cylinder attached to the top—instead of the bottom—of the

New product announcements:   04/21/2010 Air-powered Mixer: Works With Many Materials The CS Unitec Model 7 Air Mixer is intended for mixing paint, glue, epoxy, mortar, concrete, refractory cement and other materials in hazardous environments. The mixer is ATEX-approved for use in EX zones with hazardous atmospheres and is safe to be used around water. The mixer’s 1.5-hp motor has two speed settings: zero to 190 rpm and zero to 350 rpm. The device has the capacity to mix batches of material up to 110 lb. The mixer uses 49 cfm of air at 90 psi and weighs only 15 lb.

New product announcements:   04/14/2010 Coring Machine: Goes Right Through Rebar The DD 350 Coring System is a diamond-coring machine powered by a water-cooled, high-frequency brushless motor rated at 3,600 W. It features 10-speed electronic gearing, which allows for constant power output over the entire diameter range. The Iron Boost function provides extra performance for coring through rebar. The DD 350 can be used in many coring applications, including drilling corner holes, penetrations for pipes and cables, large-diameter drilling and coring in heavily reinforced concrete. Hilti; 800-879-8000; www.us.hilti.com Random Orbit Sander: Adjustable The Makita BO5041K is a 5-in. random-orbit sander that

New product announcements:   04/07/2010 Scissor Lift: Tight Turns for Proper Positioning The Omni Drive Scissor Lift is designed to provide machine movement in all directions and allows for rotation around its center point. This swivel capability permits the lift to be maneuvered in tight areas. The Omni Lift comes in four models, with platform heights of 20 ft to 40 ft and capacities of 700 lb to 1,500 lb. Stowed heights range from 81 in. to 114 in. Options include a bump system to reduce accidental damage and an EX explosion-proof version for use in hazardous environments. Man & Material

New product announcements:   03/31/2010 Boiler-tube Cutter: Optional Higher-Power Motor The MillHog is a self-centering, right-angle-drive-clamping, air-powered end prep tool designed specifically for boiler tubes. The tool is capable of prepping stainless-steel and other high-alloy tubes, ranging from 3⁄4-in. I.D. to 3-in. O.D. It features a robust gear drive with dual-tapered roll bearings and is powered by a 0.75-hp motor or an optional 1.25-hp motor. The MillHog uses the EscoLock rigid blade-lock system with a radical chip breaker, which directs the chip away from the tube and minimizes heat generation. Esco Tool; 800-343-6926; www.escotool.com Air Line Splitter: Durable Construction The D55040

New product announcements:  03/17/2010 Attic Ventilation: Solar-Powered The Broan Solar-Powered Attic Ventilator is a simple solution for temperature regulation in residential attics. The ventilator requires no external power source and helps regulate the temperature in the attic, reducing the load on the building’s heating and cooling system. The panel’s laminate can withstand rough weather and high winds, and the trim color can be set to match the surrounding rooftop. The ventilator qualifies for a federal tax credit. Broan-NuTone; 800-558-1711; www.broan.com Modular Heavy-Load Trailer: Adjustable Length The Fontaine Magnitude 55MX heavy-load trailer has a clear deck that, when retracted, is 29 ft

New product announcements:  03/10/2010 High-Speed Laser Scanner: All-in-One Data Collector The Topcon GLS-1500 laser scanner is capable of scanning 30,000 points per second during point-cloud collection. The scanner has a 490-ft range and features an onboard data collector with keypad and LCD, allowing it to be used as a stand-alone laser scanner. It features a built-in 2.0-megapixel camera that can stream live images of a site when wirelessly connected to a PC which is using the ScanMaster software. Topcon Positioning Systems; 925-245-8300; www.topconpositioning.com Silicone Sealant: Takes the Heat Thermalox 2655 is a high-temperature RTV silicone adhesive sealant; it has a temperature

New product announcements:   03/03/2010 All-terrain Crane: Now With Longer Boom The Terex AC 100/4L all-terrain crane features a main boom length of 59.4 meters, and with its variable double-fly jib it can reach a maximum length of 81.7 m. The four-axle crane fits within normal truck dimensions during travel, allowing it to operate in locations restricted to larger cranes. It can be used in a variety of lifting configurations and has a maximum capacity of 100 tonnes. The crane is powered by a 445-hp Daimler engine and comes with four standard outriggers to provide extra stability under demanding operating conditions.

New product announcements:   02/24/2010 Corded Breaker: High Power, Low Vibration The TE 1500-AVR corded breaker is able to deliver 22 ft-lb of impact energy at up to 1,950 blows per minute. According to the manufacturer, the breaker’s sub-chassis anti-vibration system significantly reduces operator pulsation. The TE 1500-AVR is compatible with the Hilti TE DRS-B dust removal system and features three-chamber sealing to keep dust out of the tool. Hilti; 800-879-8000; www.us.hilti.com Compact Cordless Bandsaw: Cuts In Close The DCS370 18-volt Cordless Bandsaw is a highly portable tool designed for cutting threaded rod, piping, conduit and other metal materials. The bandsaw’s