New product announcements: 01/21/2009 Heavy Lifter: Crawler Crane Germany-based Demag has been muscling its way into super cranes for decades but has recently added more leverage. In 2002 it launched the 1,250-tonne CC-8800 and doubled down in 2007 with the 3,200-tonne, twin-boom CC 8800-1, the largest crawler crane on the planet. Now, a 1,600-tonne midsize version has arrived, the CC 9800. Built with similar components as its big brother, the 9800’s hook tops out at 230 meters and achieves a load moment of 27,000 tonne-meters using an 800-tonne Superlift counterweight at a 30-m radius. Designed for chemical and powerplants, the rig
New product announcements: 01/14/2009 Framing Nailer: Paper-tape Nails Load Quickly The Model DF250S 20° Framing Nailer is a pneumatic nailer that can be loaded with up to 70 paper-tape nails at a time. The tool’s nail lock-out feature is designed to prevent dry firing, and according to the manufacturer, it is able to drive 16D nails flush into laminated veneer lumber without the need for additional hammering. The nailer weighs only 8.1 lb, can accept a nails from 2-in. to 3 ½-in. in smooth, ring or screw shank, and is designed to work with Duo-Fast paper-tape nail strips. Duo-Fast Construction;
New product announcements: 01/07/2009 Road milling: Dual Operator Stations The MT2000 milling machine is a four-track, front-load, half-lane milling machine powered by a 610-hp Tier 3 Cummins Engine. The machine has three distinct engine and drum-cutting speeds selectable from the operator’s control panel, with a low-speed setting for higher torque on tough road beds and a high-speed setting for maximum travel speed on shallow cuts. Two operating stations allow flexibility while either panel can control both sides of the machine. Volvo Construction Equipment; 828-650-2000; www.volvo.com Spark-Reduced Grinding Discs: Safer Eco Brazing Diamond Grinding Discs are intended for use in hazardous
New product announcements: 12/31/2008 Concrete Pouring: Truck-Mounted Boom Pump The S 32 X Truck-mounted Boom Pump now features a redesigned frame with a slewing gear-bearing turntable. The pump is able to supply 178 cu yd per hour of concrete, and 1,233 psi at 23 strokes per minute. It comes standard with a twin-wall Super 3000 pipeline, carbide wear parts and a night light kit. Optional equipment includes an auto-greasing system, high-pressure washer with wand and a water-tank heater. Schwing; 888-724-9464; www.schwing.com Foundation Drill Rig: Articulated The DeltaBase 95 Drill Rig is intended for foundation drilling, specifically tieback and soil nail
New product announcements: 12/17/2008 Quieter Generator: Designed To Prevent Leakage The T120 Super Quiet Generator features a Tier 3 diesel engine and an overlapping sheet-metal cabinet that reduces noise levels. It has standard 110% spill containment of all on-board fluids, which the manufacturer claims significantly reduces environmental contamination from spilled fuel, coolant and oil. The T120 generator is capable of 24 hours of continuous use on one tank of fuel, and power can be supplied simultaneously from its three-phase and single-phase voltage receptacles. Terex; 203-222-7170; www.terex.com Demolition Hammer: Constant Rate, Lower Vibration The MHE 96 SDS-Max Demolition Hammer is for
New product announcements: 12/10/2008 Angle Grinders: Improved Airflow The line of Milwaukee 41½-in. Angle Grinders features a redesigned airflow system, including debris baffles that deflect particles from the engine intake and multiport exhaust to extend overall tool life. The seven angle grinders have power ratings from 7 amps to 10 amps, all running at 10,000 rpm. They each feature a burst-resistant adjustable guard, soft-grip three-position side handle and external brush doors for easy access to brushes. Milwaukee Electric Tool; 800-729-3878; www.milwaukeetool.com Adhesive Anchor System: Easy Installation and Fast Cure HIT-HY 150 MAX Fast Cure Adhesive Anchor System has received an ICC-ES
New product announcements: 12/03/2008 Air Compressor: Designed For Drilling Equipment The DrillAir line of compressors is specifically designed to supply air at rates needed for drilling applications. It is capable of 1,284 cfm of free-air delivery, 1,335 cfm at 365 psi and 1,198-1,252 cfm at 435 psi. The redesigned line provides a 4% reduction in energy consumption and 15% lower thrust load. It is powered by a 575-hp, Caterpillar C18 Acert Tier 3 diesel engine, and is available in skid-mount, support-mount or tandem or wagon-wheel versions. Atlas Copco; 803-817-7434; www.atlascopco.com Equipment Tracking: Wireless Monitoring The OEM Data Delivery Telematics System
New product announcements: 11/26/2008 Telescoping Boom: Staying Balanced The S-85 Model of telescoping booms includes several new features, including fixed-width axles for simpler transport and setup and a virtual pivot boom system, which keeps the weight of the boom over the chassis while it elevates, reducing the need for extra counterweights. The 80-ft boom of the S-85 can extend to fully elevated in 68 seconds and new boom sensors keep it smooth. Genie Industries Inc.; 800-536-1800; www.genieindustries.com Field Controller: Log Survey Data, Snap Photos The FC-2500 Field Controller is a rugged, waterproof surveying tool which features a 624-MHz processor, 256